|
Product Range
|
Product Range
Blast-furnace plant:
- The production of conversion pig iron of P1, P2, PL1, PL2 grades (DSTU Ukrainian standard 3133-95, GOST National standard 805-95);
- The production of cast iron of L1-L6 grades (DSTU Ukrainian standard 3132-95, GOST National standard 4832-95).
Continuous-casting machine (slabs):
- Continuously cast rectangular steel billets (slabs) 200, 220, 250, 300 (TI 229-MZ-76-2005).
Mill 600:
- The production of square steel billets 100×100 mm, 120×120 mm, 125×120 mm (Technical conditions of Ukraine 14-2-1253-2000);
- The production of profiled bar:
- I-beams 14, 20 (GOST National standard 8239-89), W200×26,6 ASTM A36/A36M;
- steel channels with parallel flanges 12, 14, 16, 18, 20 (National standard 8240-89), C200×17,1; C250×22,8 ASTM A36/A36M;
- equal angles 100–125×8–12 (GOST National standard 8509-86);
- special shapes for mine working support 17, 22, 27, 33 (GOST National standard 18662-83).
Plate mills 2250, 3000:
- carbon sheet, steel 3 ps/sp, GOST National standard 14637-89, the thickness is 5-50 mm;
- structural sheet, steel 0.8–50, GOST National standard 1577-93;
- structural sheet, steel 15G–65G, GOST National standard 1577-93;
- structural sheet, steel 40è, 45è, GOST National standard 1577-93;
- low-alloyed sheet, 09G2ó, 09G2, 17G1ó, GOST National standard 19281-89;
- alloyed sheet, 10èSND, GOST National standard 19281-89, National standard 6713-91;
- alloyed sheet, 15èSND, National standard 19281-89, National standard 6713-91;
- carbon strips, steel 3 ps/sp, National standard 14637-89;
- low-alloyed strips, 12G2ó, 17G1ó, TU-14-1-1921-76.
Blast-furnace plant :
- The production of conversion pig iron of the following grades: P1, P2, PL1, PL 2 (DSTU national standard 3133-95; GOST standard 805-95);
- The production of cast iron of L1-L6 grades (DSTU national standard 3132-95; GOST standard 4832-95).
Continuous casting machine:
| Section |
Normative Technical document |
Length |
Steel grade |
Normative Technical document |
| billets 150×150 mm |
TCU, Technical conditions of Ukraine 14-2-1222-98 |
3700 Ÿ 12000 |
St.2-5ps/sp |
GOST 380 |
| billets 130×130 mm |
3700 Ÿ 12000 |
St.44.2 |
DIN 17100 |
| billets 160×160 mm |
3700 Ÿ 12000 |
A36 |
ASTM A36 |
| billets 200×200 mm |
|
|
|
| billets 280×280 mm |
|
|
|
| billets 335×400 mm |
|
|
|
Mill 900, rail and structural steel mill, rails:
| Section |
Normative Technical document |
Length |
Steel grade |
Normative Technical document |
| billets 130×130 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
12 000 mm |
St. 2-5ps |
GOST 380 |
| billets 125×125 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
12 000 mm |
St. 2-5ps |
GOST 380 |
| billets 100×100 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
12 000 mm |
St. 2-5ps |
GOST 380 |
| H-beam 27óá |
GOST 19425-74 |
12 000 mm |
St. 3 kp/ps, St 37.2 |
|
| Larssen sheet piles L4 |
TCU, Technical conditions of Ukraine 27.1-26524137-1375:2008 |
up to 22 000 mm |
St. 3 kp, 16XG |
|
| Larssen sheet piles L5 |
TCU, Technical conditions of Ukraine 27.1-26524137-1375:2008 |
up to 22 000 mm |
St. 3 kp, 16XG |
|
| Larssen sheet piles L7 |
TCU, Technical conditions of Ukraine 27.1-26524137-1375:2008 |
up to 22 000 mm |
St. 3 kp, 16XG |
|
| Larssen sheet piles L5D |
|
|
|
|
| Rails ò-43, ò-38, ò-50 |
GOST 30165-94 |
12 500 mm |
St. 70 |
|
| Contact rails MK |
TCU, Technical conditions of Ukraine 27.1-26524137-788:2006 |
12 500 mm |
St. 70 |
|
Mill 900, rail and structural steel mill, billet:
| Section |
Normative Technical document |
Length |
Steel grade |
Normative Technical document |
| billets 150×150 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
6 000 mm |
St. 2-5ps |
GOST 380 |
| billets 130×130 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
6 000 mm |
St. 2-5ps |
GOST 380 |
| billets 125×125 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
6 000 mm |
St. 2-5ps |
GOST 380 |
| billets 100×100 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
6 000 mm |
St. 2-5ps |
GOST 380 |
| Section for brickwork of ore-grinding mills |
TU 27.1-4-513-2001 |
6 000 mm |
St. 70GF |
|
| Strip section for aluminium electrolizers 230×115 mm |
GOST 30565 |
6 000 mm |
St. 3 kp/ps |
|
Mill 250, axial rolling mill:
| Products |
Normative Technical document |
Section shape, title |
The draft of semi-finished axis |
Steel grade |
| 1. Profile shape for railcars’ axes |
| TCU, Technical conditions of Ukraine 27.1-4-575-2004 |
1-ZPOV |
RAX-003, RAX-024 |
OC |
| 2-ZPOV |
OC |
| 2. Profile shape for locomotive axes |
| TCU, Technical conditions of Ukraine 27.1-4-575-2004 |
1-ZPLO |
— |
OC |
| 2-ZPLO |
RAX-057, RAX-058 |
OC |
| 3-ZPLO |
RAX-022 |
OC |
| 4-250-ZPTO |
RAX-031 |
OC |
| 5-250-ZPTO |
RAX-056 |
OC |
| 4-ZPLO |
RAX 026.1, RAX 026.1lv, RAX-027, RAX 027lv |
OC |
| 3. Profile shape for diesel-trains |
| TCU, Technical conditions of Ukraine 27.1-4-575-2004 |
1-ZPD |
RAX-035 |
OC |
| 2-ZPD |
— |
OC |
| 3-250-ZP-RB3 |
RAX-029 |
OC |
| 4-250-ZP-RBú |
RAX-030 |
OC |
| 5-250-ZP-RBú |
RAX-059 |
OC |
| 6-250-ZP-RBú |
RAX-034 |
OC |
| 4. Profile shape for underground railway carriages |
| TCU, Technical conditions of Ukraine 27.1-4-575-2004 |
1-ZPVM |
— |
OC |
| 1-ZPOV |
RAX-028.01 |
OC |
| 5. Profile helical rolled billets (of general purpose) |
| TCU, Technical conditions of Ukraine 27.1-4-575-2004 |
250-ZPON-1 |
— |
OC |
| 250-ZPON-2 |
RAX-042 |
OC |
| 250-ZPON-3 |
— |
OC |
| 250-ZPON-4 |
RAX-032 |
OC |
| 7. Profile helical rolled billets (of general purpose) |
| í-101-90 |
ZPOV-CAN-1d |
RAX-001; RON-A001B; RON-A003B |
ïó/F |
| ZPOV-CAN-2d |
RON-A004 |
ïó/F |
| ZPOV-CAN-4d |
RON-A003B |
ïó/F |
| ZPOV-CAN-8d |
RON-A002B; DDAP-01; RON-A003B |
ïó/F |
| ZPOV-CAN-9d |
RAX-048 |
ïó/F |
| ZPOL-CAN |
RON-A-0047 |
ïó/F |
| ZPLO-CAN-2 |
RON-B-012 |
ïó/F |
| ZPLO-CAN-3 |
RON-B-011 |
ïó/F |
| ZPLO-CAN-4 |
RON-B-018 |
ïó/F |
| ZPPO-CAN |
RON-B-017 |
ïó/F |
| 8. Profile shape for the axes of railway main-line cars, PRC (for RD2 axis) |
| Technical requirements to the contract |
250-PRC-1 |
RAX-047 |
OC |
Mill 750:
| Pipe billet mill |
Section |
Normative Technical document |
Length |
Steel grade |
Normative Technical document |
| Hollow billets |
diemater from 120 mm ÄÏ 300 mm |
TCU, Technical conditions of Ukraine 14-2-1223-98, GSTU 3-009-2000 |
4000-7200 mm |
St. 10, St. 20, St. 45, Grade B, D |
|
| Sqaure billets |
billets 160×160 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
6 000 mm |
St. 2-5sp |
GOST 380 |
| billets 150×150 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
6 000 mm |
St. 2-5sp |
GOST 380 |
| billets 130×130 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
6 000 mm |
óÔ. 2-5ÓÐ |
GOST 380 |
| billets 125×125 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
6 000 mm |
St. 2-5sp |
GOST 380 |
| billets 250×250 mm |
TCU, Technical conditions of Ukraine 14-2-1221-98 |
6 000 mm |
St. 2-5sp |
GOST 380 |
Mill 350:
| Profile |
Angle sections |
Normative Technical document |
Length |
Steel grade |
Normative Technical document |
| Steel hot-rolled equal angle sections |
| 40×40 |
4; 5 |
DSTU 2251-93 (GOST 8509-93), DIN 1028 |
6000 Ÿ 12000 |
St. 3 ps/sp; St. 5 ps/sp; |
GOST 380 |
| 45×45 |
4; 4,5; 5 |
DSTU 2251-93 (GOST 8509-93), DIN 1028 |
09G2S |
GOST 19281 |
| 50×50 |
4; 4,5; 5; 6 |
DSTU 2251-93 (GOST 8509-93), DIN 1028 |
St. 37.2; RSt. 37.2; St. 44.2; St. 52.3 |
DIN 17100 |
| 60×60 |
5; 6; 7; 8 |
DIN 1028 |
S235; S275; S355 |
EN 10025 |
| 63×63 |
5; 6 |
DSTU 2251-93 (GOST 8509-93) |
á36 |
ASTM A36 |
| 65×65 |
5 (ôô); 6; 7 |
DSTU 2251-93 (GOST 8509-93), DIN 1028, TT |
|
|
| 70×70 |
5; 6; 7; 8 |
DSTU 2251-93 (GOST 8509-93), DIN 1028 |
|
|
| 75×75 |
5; 6; 7; 8; 9 |
DSTU 2251-93 (GOST 8509-93), DIN 1028 |
|
|
| 80×80 |
5; 6; 7; 8; 9 |
DSTU 2251-93 (GOST 8509-93), DIN 1028 |
|
|
| 90×90 |
6; 7; 8; 9 |
DSTU 2251-93 (GOST 8509-93), DIN 1028 |
|
|
| 100×100 |
6; 7; 8; 10; 12 |
DSTU 2251-93 (GOST 8509-93), DIN 1028 |
|
|
| Hot-rolled steel channels |
| №6,5; №8; №10; U65; U80; U100 |
— |
DSTU 3436-69 (GOST 8240-97), DIN 1026 |
6000 Ÿ 12000 |
St. 3 ps/sp; St. 5 ps/sp; |
GOST 380 |
| 09G2S |
GOST 19281 |
| St. 37.2; RSt. 37.2; St. 44.2; St. 52.3 |
DIN 17100 |
| S235; S275; S355 |
EN 10025 |
| á36 |
ASTM A36 |
| Hot-Rolled stock of round section |
| Ø36, 40, 42, 45, 48, 50, 56, 60, 65 |
— |
GOST 2590-88, TU U 14-2-1223-98 |
3000 Ÿ 12000 |
St. 20, St. 35, St. 45, 40è, |
|
Ball mill (st. 400):
| Profile |
Diameter, mm |
Normative Technical document |
Hardness |
| Steel milling balls |
40; 60 |
GOST 7524-85 |
group 2-3 |
- Furnace coke Technical conditions of Ukraine (TCU) 322-00190443-114-96;
- Furnace coke from rammed charge TCU 322-00190443-076-96;
- Coke nut TCU 322-00190443-120-97;
- Low-mesh coke TCU 322-00190443-011-96;
- Coal-tar oil TCU 23.1-00190443-100:2007;
- Ammonium sulfate of coke and by-product process TCU 24.1-00190443-067:2007;
- Raw coal naphtha TCU 24.1-00190443-003-2003;
- Industrial spirit of alum All-Ukrainian standard 2184-77;
- Phenolates TCU 322-00190443-046-98;
- Acid tarring resin for road pavement TCU 322-00190443-131-98;
- Neat coke gas TCU 322-00190443-101-99;
- Blast-furnace coke Alchevsk Coking Plant TCU 322-00190443-023-97.
- slabs;
- hot-rolled products:
- soft steel strips;
- unalloyed structural steel;
- steel, resistant to atmospheric corrosion;
- steel for manufacturing boilers and pressure vessels;
- steel for tube production;
- fine-grained steel;
- tempering, case-hardening steels and spring steel;
- wear-resistant steel;
- electro-technical steel;
- cold-rolled products:
- cold-rolled wide and slit strip or sheet;
- cold-rolled, unalloyed mild steel for cold-forming;
- cold re-rolled grade for providing required tensile strength;
- cold-rolled unalloyed and alloyed semi-finished steel sheets and strips for producing magnetic cores of rotors and stators of electric motors and different components of magnetic circuits;
- cold-rolled, unalloyed mild steel for conventional enamelling;
- general purpose constructional steel;
- cold-rolled steel, resistant to atmospheric corrosion;
- micro-alloyed high-strength structural steel grades for cold-forming;
- hot-rolled, pickled and hot-rolled, pickled and tempered wide and narrow strips and sheets:
- hot-rolled unalloyed mild steel;
- general purpose constructional steel;
- enamellable steel grades according to special agreements and steel grade FeP13-B according to DASZ 206:97 standard;
- micro-alloyed steel grades;
- cold-roll forming:
- cold-formed channels (U-profile);
- cold-formed equal steel angles (L-profile);
- cold-formed unequal steel angles (L-profile);
- cold-formed steel C-profile;
- cold-formed steel Z-profile;
- products with coating:
- dip galvanized steel coils and sheets;
- construction materials;
- bent members;
- jointing and auxiliary materials.
|